WiFi-Texas WS-POE-12-48v60w 12 Port Passive Power over Ethernet PoE Injector for Low Power 802.3af Devices Like Cameras, IP Phones, Access Points, Add PoE to any Switch

Add 12 ports of PoE to any Switch • proven reliability since 2012 • 10/100 data rate • see also our gigabit and wall mount versions • power 12 Cameras, WiFi AP's or IP Phones with 60 watts total power • power any 802.3af device • power any 12v,PoE device (see our video for info) • 1U high rack mount - less than one inch deep • 12 data in, 12 data + PoE out • this is not a switch - you use it to add PoE to any switch or router • extend power to 328 ft or 100 meters • Built-in fuse on each port, 650 ma • power is on all the time. 2.1mm DC connector Power Supply Included • 48 volts DC, 1.25 amps, 60 watts• 110 to 220 volt AC operation • 90% efficient • UL, CE and FCC approved • unique mounting holes • reversing cable for Cisco 7940 and 7960 is included Details These devices provide power on the spare data wires in the Ethernet cable. All devices receive the same voltage (48v) - total of all devices is 60 watts. Power is on all the time. Check device specs for power needs, it is under 4 watts for most Phones, other devices need more. Other products from WiFi-Texas • WS-POES-8-7-48v60w with integrated switch • WT-GPOE-4-48v48w for gigabit data • WS-POE-12-48v120w for double the power • WS-POE-24-48v120w for double the ports • WS-GPOE-12-48v120w for gigabit data and high power • WS-PoE-Tester to display power used by a device• WT-AF 5 and 12 volt step down converters for non-PoE things• Full details and data sheet at https://www.poetexas.com/

Browse Our Catalog.

View More In Wireless Access Points.